Controllers
E-Brakes
The perfect solution when only electric brakes are needed.
In case the brakes are off-balanced, you can compensate this by pressing the left or right button of the controller for a fine adjustment of each output, to obtain a straight brake trajectory.
Setup your brakes for a continuous brake , or select one of the 3 different ABS settings available.
Don’t let its size fool you, as the E-Brakes is capable of handling 28V per output, being able to power our largest brake sizes for an outstanding performance.
You can precisely control how much brake power is applied at any given time. The controller its also very easy to setup and program.
When you are only using our brakes, you don’t need a controller with a features that you will not use. The E-Brakes are exactly what you want in those cases.
Manual Controller
An easy and safe way to quickly extend and retract your landing gear.
This is all you need
Sometimes you just want to test one retract, or maybe you have to deploy or retract your landing gear to assemble your model, but you really don’t want to use your radio and receiver for that.
The Manual Controller allows you to do this with a single connection. All you need is a cable and a battery.
Control at your fingertips
With two buttons, you can move the retract in both directions, exactly where you want it to be.
Release the button when you want the retract to stop, or keep pressing until it completes its movement: it will safely stop and remain fully locked in place.
One unit for all retracts
This device allows you to operate all types and versions of our electric retracts.
Cycle though the different settings with the LED/Button. You can see at all times which color corresponds to your retract model.
Safety First
By using the Manual Controller, you can handle your landing gear without the concern of voiding your warranty or burning the retract motor.
Using a battery to directly power your retract is dangerous and should never be done.
